![products](http://copythat.design/dev/asn001/wp-content/uploads/2021/02/products.jpeg)
Hammer Mill – series x.2D
The hammer mill series x.2D is a 3.000 rpm mill which is designed to support almost any demand in the brewery segment. In over 100 breweries throughout the globe this mill type is a stable and reliable backbone in brew house raw material supply.
The mills are standard equipped with feeder for mill load control, expansion bin with grist extraction system, manual sampling unit and filter/ventilator. Explosion venting and barriers at inlet and outlet support full ATEX compliance.
![hammer mill](http://copythat.design/dev/asn001/wp-content/uploads/2015/02/hammer-mill.jpg)
![Hammer Mill 1.2D Hammer Mill 1.2D](http://copythat.design/dev/asn001/wp-content/uploads/2015/03/Hammer-Mill-1.2D1.png)
1.2D – 5.2 T/HR
(All figures by approximation)
![]() |
Maximum capacity: 5.2 T/Hr |
---|---|
![]() |
Standard: 37 kW = 5.0 T/hr malt |
![]() |
Range: 22 – 55 kW |
![Hammer Mill 2.2D Hammer Mill 2.2D](http://copythat.design/dev/asn001/wp-content/uploads/2015/03/Hammer-Mill-2.2D.png)
2.2D – 8.4 T/HR
(All figures by approximation)
![]() |
Maximum capacity: 8.4 T/Hr |
---|---|
![]() |
Standard: 55 kW = 6.9 T/hr malt |
![]() |
Range: 37 – 90 kW |
![Hammer Mill 3.2D Hammer Mill 3.2D](http://copythat.design/dev/asn001/wp-content/uploads/2015/03/Hammer-Mill-3.2D.png)
3.2D – 13.0 T/HR
(All figures by approximation)
![]() |
Maximum capacity: 13.0 T/Hr |
---|---|
![]() |
Standard: 90 kW = 11.6 T/hr malt |
![]() |
Range: 75 – 160 kW |
![Hammer Mill 4.2D](http://copythat.design/dev/asn001/wp-content/uploads/2015/03/Hammer-Mill-4.2D.png)
4.2D – 20.0 T/HR
(All figures by approximation)
![]() |
Maximum capacity: 20.0 T/Hr |
---|---|
![]() |
Standard: 135 kW = 19.6 T/hr malt |
![]() |
Range: 110 – 275 kW |